this tmux stuff needs refining

ew python
those darn snake charmers (that's practically a slur for python devs,
right?)

fish/.config/fish/config.fish

@@ -42,10 +42,10 @@ starship init fish | source
 # yet for some reason I'm not always using it
 #
 # Should only activate in a terminal emulator though, since it starting
-# with the env of the tty instead of the wayland session is really
+# with the env of the tty or neovim instead of the wayland session is 
-# annoying tbh
+# really annoying tbh
 
-if not tty | string match --quiet --regex '^/dev/tty[0-9]+$'
+if not tty | string match --quiet --regex '^/dev/tty[0-9]+$' || set -q TMUX || set -q NVIM
     # Making it a varible just in case I wanna change it some day
     set DEFAULT_SESSION home
     if status is-interactive && not set -q TMUX

ironbar/.config/ironbar/config.corn

@@ -1,120 +0,0 @@
-let {
-    $workspaces = {
-        type = "workspaces"
-        all_monitors = false
-    //     name_map = {
-    //         1 = "󰙯"
-    //         2 = "icon:firefox"
-    //         3 = ""
-    //         Games = "icon:steam"
-    //         Code = ""
-    //     }
-    }
-
-    $focused = { type = "focused" }
-
-    $launcher = {
-        type = "launcher"
-        favorites = ["firefox" "discord" "steam"]
-        show_names = false
-        show_icons = true
-    }
-
-    $mpris = {
-        type = "music"
-        player_type = "mpris"
-
-        on_click_middle = "playerctl play-pause"
-        on_scroll_up = "playerctl volume +5"
-        on_scroll_down = "playerctl volume -5"
-
-    }
-
-    $notifications = {
-        type = "notifications"
-        show_count = true
-
-        icons.closed_none = "󰍥"
-        icons.closed_some = "󱥂"
-        icons.closed_dnd = "󱅯"
-        icons.open_none = "󰍡"
-        icons.open_some = "󱥁"
-        icons.open_dnd = "󱅮"
-    }
-
-    $sys_info = {
-        type = "sys_info"
-
-        interval.memory = 30
-        interval.cpu = 1
-        interval.temps = 5
-        interval.disks = 300
-        interval.networks = 3
-
-        format = [
-        " {cpu_percent}% | {cpu_frequency} GHz | {temp_c@CPUTIN}°C"
-        " {memory_used} / {memory_total} GB ({memory_available} {swap_used} / {swap_total} GB ({swap_free} | {swap_percent}%)"
-        "󰋊 {disk_used#T@/:.1} / {disk_total#T@/:.1} TB ({disk_percent@/}%) | {disk_read} / {disk_write} MB/s"
-        "󰓢 {net_down@enp39s0} / {net_up@enp39s0} Mbps"
-        // "󰖡 {load_average1} | {load_average5} | {load_average15}"
-        "󰥔 {uptime}"
-        ]
-    }
-
-    $tray = { type = "tray" }
-
-    $clock = { type = "clock" }
-
-    $clipboard = { type = "clipboard" max_items = 75 truncate.mode = "end" truncate.length = 50 }
-
-    $volume = {
-        type = "volume"
-        format = "{icon} {percentage}%"
-        max_volume = 100
-        icons.volume_high = "󰕾"
-        icons.volume_medium = "󰖀"
-        icons.volume_low = "󰕿"
-        icons.muted = "󰝟"
-    }
-
-    // -- begin custom --
-    $button = { type = "button" name="power-btn" label = "" on_click = "popup:toggle" }
-
-    $popup = {
-        type = "box"
-        orientation = "vertical"
-        widgets = [
-            { type = "label" name = "header" label = "Power menu" }
-            {
-                type = "box"
-                widgets = [
-                    { type = "button" class="power-btn" label = "<span font-size='40pt'></span>" on_click = "!shutdown now" }
-                    { type = "button" class="power-btn" label = "<span font-size='40pt'></span>" on_click = "!reboot" }
-                ]
-            }
-            { type = "label" name = "uptime" label = "Uptime: {{30000:uptime -p | cut -d ' ' -f2-}}" }
-        ]
-    }
-
-    $power_menu = {
-        type = "custom"
-        class = "power-menu"
-
-        bar = [ $button ]
-        popup = [ $popup ]
-
-        tooltip = "Up: {{30000:uptime -p | cut -d ' ' -f2-}}"
-    }
-    // -- end custom --
-
-    $left = [ $workspaces $launcher ]
-    $right = [ $sys_info $volume $clipboard $power_menu $clock $notifications ]
-}
-in {
-    anchor_to_edges = true
-    position = "top"
-    icon_theme = "Paper"
-
-    start = $left
-    end = $right
-}

niri/.config/niri/config.kdl

@@ -117,7 +117,7 @@ input {
 // https://yalter.github.io/niri/Configuration:-Layout
 layout {
     // Set gaps around windows in logical pixels.
-    gaps 8
+    gaps 4
 
     // When to center a column when changing focus, options are:
     // - "never", default behavior, focusing an off-screen column will keep at the left
@@ -165,7 +165,7 @@ layout {
         // off
 
         // How many logical pixels the ring extends out from the windows.
-        width 4
+        width 2
 
         // Colors can be set in a variety of ways:
         // - CSS named colors: "red"
@@ -274,8 +274,11 @@ layout {
 // See the binds section below for more spawn examples.
 
 // This line starts waybar, a commonly used bar for Wayland compositors.
-spawn-at-startup "ironbar"
+// spawn-at-startup "ironbar"
-spawn-at-startup "swaync"
+// spawn-at-startup "swaync"
+
+// Trying this noctalia thing and we will go from there
+spawn-at-startup "qs" "-c" "noctalia-shell"
 
 // To run a shell command (with variables, pipes, etc.), use spawn-sh-at-startup:
 // spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell"
@@ -348,10 +351,20 @@ window-rule {
 
 // Example: enable rounded corners for all windows.
 window-rule {
-    geometry-corner-radius 12
+    geometry-corner-radius 20
     clip-to-geometry true
 }
 
+// Suggested for Noctalia
+layer-rule {
+    match namespace="^quickshell-overview$"
+    place-within-backdrop true
+}
+
+debug {
+    honor-xdg-activation-with-invalid-serial
+}
+
 binds {
     // Keys consist of modifiers separated by + signs, followed by an XKB key name
     // in the end. To find an XKB name for a particular key, you may use a program
@@ -367,10 +380,29 @@ binds {
     // shows a list of important hotkeys.
     Mod+Shift+Slash { show-hotkey-overlay; }
 
+    // Core Noctalia binds
+    Mod+D { spawn "qs" "-c" "noctalia-shell" "ipc" "call" "launcher" "toggle"; }
+    Mod+S { spawn "qs" "-c" "noctalia-shell" "ipc" "call" "controlCenter" "toggle"; }
+    Mod+Comma { spawn "qs" "-c" "noctalia-shell" "ipc" "call" "settings" "toggle"; }
+
+    // Audio controls
+    XF86AudioRaiseVolume { spawn "qs" "-c" "noctalia-shell" "ipc" "call" "volume" "increase"; }
+    XF86AudioLowerVolume { spawn "qs" "-c" "noctalia-shell" "ipc" "call" "volume" "decrease"; }
+    XF86AudioMute { spawn "qs" "-c" "noctalia-shell" "ipc" "call" "volume" "muteOutput"; }
+
+    // Brightness controls
+    XF86MonBrightnessUp { spawn "qs" "-c" "noctalia-shell" "ipc" "call" "brightness" "increase"; }
+    XF86MonBrightnessDown { spawn "qs" "-c" "noctalia-shell" "ipc" "call" "brightness" "decrease"; }
+
+    // Utility shortcuts
+    Mod+V { spawn "qs" "-c" "noctalia-shell" "ipc" "call" "launcher" "clipboard"; }
+    // Mod+C { spawn "qs" "-c" "noctalia-shell" "ipc" "call" "launcher" "calculator"; }
+    Mod+Alt+L { spawn "qs" "-c" "noctalia-shell" "ipc" "call" "lockScreen" "toggle"; }
+
     // Suggested binds for running programs: terminal, app launcher, screen locker.
     Mod+T hotkey-overlay-title="Open a Terminal: alacritty" { spawn "alacritty"; }
-    Mod+D hotkey-overlay-title="Run an Application: anyrun" { spawn "anyrun"; }
+    Alt+Space hotkey-overlay-title="Run an Application: anyrun" { spawn "anyrun"; }
-    Super+Alt+L hotkey-overlay-title="Lock the Screen: swaylock" { spawn "swaylock"; }
+    // Super+Alt+L hotkey-overlay-title="Lock the Screen: swaylock" { spawn "swaylock"; }
 
     // Use spawn-sh to run a shell command. Do this if you need pipes, multiple commands, etc.
     // Note: the entire command goes as a single argument. It's passed verbatim to `sh -c`.
@@ -380,9 +412,9 @@ binds {
     // Example volume keys mappings for PipeWire & WirePlumber.
     // The allow-when-locked=true property makes them work even when the session is locked.
     // Using spawn-sh allows to pass multiple arguments together with the command.
-    XF86AudioRaiseVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1+"; }
+    // XF86AudioRaiseVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1+"; }
-    XF86AudioLowerVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1-"; }
+    // XF86AudioLowerVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1-"; }
-    XF86AudioMute        allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle"; }
+    // XF86AudioMute        allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle"; }
     XF86AudioMicMute     allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle"; }
     // On the topic of this, if you ever get a media (player) manager, the numpad keys
     // are KP_Divide, KP_Multiply, and KP_Subtract you weirdo
@@ -390,8 +422,8 @@ binds {
     // Example brightness key mappings for brightnessctl.
     // You can use regular spawn with multiple arguments too (to avoid going through "sh"),
     // but you need to manually put each argument in separate "" quotes.
-    XF86MonBrightnessUp allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "+10%"; }
+    // XF86MonBrightnessUp allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "+10%"; }
-    XF86MonBrightnessDown allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "10%-"; }
+    // XF86MonBrightnessDown allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "10%-"; }
 
     // Open/close the Overview: a zoomed-out view of workspaces and windows.
     // You can also move the mouse into the top-left hot corner,
@@ -543,10 +575,11 @@ binds {
     Mod+BracketLeft  { consume-or-expel-window-left; }
     Mod+BracketRight { consume-or-expel-window-right; }
 
+    // These have just messed with me lowkey
     // Consume one window from the right to the bottom of the focused column.
-    Mod+Comma  { consume-window-into-column; }
+    // Mod+Comma  { consume-window-into-column; }
     // Expel the bottom window from the focused column to the right.
-    Mod+Period { expel-window-from-column; }
+    // Mod+Period { expel-window-from-column; }
 
     Mod+R { switch-preset-column-width; }
     // Cycling through the presets in reverse order is also possible.
@@ -581,7 +614,8 @@ binds {
     Mod+Shift+Equal { set-window-height "+10%"; }
 
     // Move the focused window between the floating and the tiling layout.
-    Mod+V       { toggle-window-floating; }
+    // These keybinds don't feel ergonomic in the slightest
+    Mod+Alt+V       { toggle-window-floating; }
     Mod+Shift+V { switch-focus-between-floating-and-tiling; }
 
     // Toggle tabbed column display mode.

noctalia/.config/noctalia/colors.json

@@ -0,0 +1,16 @@
+{
+    "mError": "#f38ba8",
+    "mOnError": "#11111b",
+    "mOnPrimary": "#11111b",
+    "mOnSecondary": "#11111b",
+    "mOnSurface": "#cdd6f4",
+    "mOnSurfaceVariant": "#a3b4eb",
+    "mOnTertiary": "#11111b",
+    "mOutline": "#4c4f69",
+    "mPrimary": "#cba6f7",
+    "mSecondary": "#fab387",
+    "mShadow": "#11111b",
+    "mSurface": "#1e1e2e",
+    "mSurfaceVariant": "#313244",
+    "mTertiary": "#94e2d5"
+}

noctalia/.config/noctalia/settings.json

@@ -0,0 +1,229 @@
+{
+    "appLauncher": {
+        "backgroundOpacity": 1,
+        "enableClipboardHistory": true,
+        "pinnedExecs": [
+        ],
+        "position": "center",
+        "sortByMostUsed": true,
+        "useApp2Unit": false
+    },
+    "audio": {
+        "cavaFrameRate": 60,
+        "mprisBlacklist": [
+        ],
+        "preferredPlayer": "",
+        "visualizerType": "linear",
+        "volumeOverdrive": false,
+        "volumeStep": 5
+    },
+    "bar": {
+        "backgroundOpacity": 1,
+        "density": "default",
+        "floating": false,
+        "marginHorizontal": 1.25,
+        "marginVertical": 0.25,
+        "monitors": [
+        ],
+        "position": "top",
+        "showCapsule": true,
+        "widgets": {
+            "center": [
+                {
+                    "hideUnoccupied": false,
+                    "id": "Workspace",
+                    "labelMode": "index"
+                }
+            ],
+            "left": [
+                {
+                    "id": "SystemMonitor",
+                    "showCpuTemp": true,
+                    "showCpuUsage": true,
+                    "showDiskUsage": false,
+                    "showMemoryAsPercent": false,
+                    "showMemoryUsage": true,
+                    "showNetworkStats": false
+                },
+                {
+                    "autoHide": true,
+                    "id": "ActiveWindow",
+                    "scrollingMode": "hover",
+                    "showIcon": true
+                },
+                {
+                    "autoHide": true,
+                    "id": "MediaMini",
+                    "scrollingMode": "hover",
+                    "showAlbumArt": false,
+                    "showVisualizer": false,
+                    "visualizerType": "linear"
+                }
+            ],
+            "right": [
+                {
+                    "id": "ScreenRecorder"
+                },
+                {
+                    "id": "Tray"
+                },
+                {
+                    "hideWhenZero": true,
+                    "id": "NotificationHistory",
+                    "showUnreadBadge": true
+                },
+                {
+                    "id": "WiFi"
+                },
+                {
+                    "id": "Bluetooth"
+                },
+                {
+                    "displayMode": "onhover",
+                    "id": "Battery",
+                    "warningThreshold": 30
+                },
+                {
+                    "displayMode": "onhover",
+                    "id": "Volume"
+                },
+                {
+                    "displayMode": "onhover",
+                    "id": "Brightness"
+                },
+                {
+                    "formatHorizontal": "HH:mm ddd, MMM dd",
+                    "formatVertical": "HH mm - dd MM",
+                    "id": "Clock",
+                    "useMonospacedFont": true,
+                    "usePrimaryColor": true
+                },
+                {
+                    "customIconPath": "",
+                    "icon": "noctalia",
+                    "id": "ControlCenter",
+                    "useDistroLogo": false
+                }
+            ]
+        }
+    },
+    "brightness": {
+        "brightnessStep": 5
+    },
+    "colorSchemes": {
+        "darkMode": true,
+        "matugenSchemeType": "scheme-rainbow",
+        "predefinedScheme": "Catppuccin",
+        "useWallpaperColors": false
+    },
+    "dock": {
+        "autoHide": false,
+        "backgroundOpacity": 1,
+        "exclusive": false,
+        "floatingRatio": 1,
+        "monitors": [
+        ],
+        "pinnedApps": [
+        ]
+    },
+    "general": {
+        "animationDisabled": false,
+        "animationSpeed": 1.1500000000000001,
+        "avatarImage": "/home/foreverpyrite/Pictures/Pysprite/ForeverPyrite Head.png",
+        "dimDesktop": true,
+        "forceBlackScreenCorners": false,
+        "radiusRatio": 1,
+        "screenRadiusRatio": 1,
+        "showScreenCorners": false
+    },
+    "hooks": {
+        "darkModeChange": "",
+        "enabled": false,
+        "wallpaperChange": ""
+    },
+    "location": {
+        "name": "New York",
+        "showWeekNumberInCalendar": false,
+        "use12hourFormat": false,
+        "useFahrenheit": true
+    },
+    "matugen": {
+        "enableUserTemplates": false,
+        "foot": false,
+        "fuzzel": false,
+        "ghostty": false,
+        "gtk3": false,
+        "gtk4": false,
+        "kitty": false,
+        "pywalfox": false,
+        "qt5": false,
+        "qt6": false,
+        "vesktop": false
+    },
+    "network": {
+        "wifiEnabled": true
+    },
+    "nightLight": {
+        "autoSchedule": true,
+        "dayTemp": "6500",
+        "enabled": true,
+        "forced": true,
+        "manualSunrise": "06:30",
+        "manualSunset": "18:30",
+        "nightTemp": "4000"
+    },
+    "notifications": {
+        "alwaysOnTop": false,
+        "criticalUrgencyDuration": 15,
+        "doNotDisturb": false,
+        "lastSeenTs": 1759199713000,
+        "location": "top_right",
+        "lowUrgencyDuration": 3,
+        "monitors": [
+        ],
+        "normalUrgencyDuration": 8,
+        "respectExpireTimeout": false
+    },
+    "osd": {
+        "autoHideMs": 2000,
+        "enabled": true,
+        "location": "top_right",
+        "monitors": [
+        ]
+    },
+    "screenRecorder": {
+        "audioCodec": "opus",
+        "audioSource": "default_output",
+        "colorRange": "limited",
+        "directory": "/home/foreverpyrite/Videos",
+        "frameRate": 60,
+        "quality": "very_high",
+        "showCursor": true,
+        "videoCodec": "h264",
+        "videoSource": "portal"
+    },
+    "settingsVersion": 12,
+    "ui": {
+        "fontBillboard": "Inter",
+        "fontDefault": "NimbusSansDOT Nerd Font",
+        "fontFixed": "Hack Nerd Font Mono",
+        "idleInhibitorEnabled": false,
+        "monitorsScaling": [
+        ]
+    },
+    "wallpaper": {
+        "directory": "/home/foreverpyrite/Pictures/Wallpapers",
+        "enableMultiMonitorDirectories": false,
+        "enabled": false,
+        "fillColor": "#000000",
+        "fillMode": "crop",
+        "monitors": [
+        ],
+        "randomEnabled": false,
+        "randomIntervalSec": 300,
+        "setWallpaperOnAllMonitors": true,
+        "transitionDuration": 1500,
+        "transitionEdgeSmoothness": 0.05,
+        "transitionType": "random"
+    }
+}

nvim/.config/nvim/init.lua

@@ -1,10 +1,30 @@
 -- bootstrap lazy.nvim, LazyVim and your plugins
 require("config.lazy")
 
+-- Unfortunately, the file paths are too long and break things
+vim.loader.enable(false)
+
+-- Clipboard (hopefully, right now my clipboard provider is tmux ig so...)
+vim.o.clipboard = "unnamedplus"
+vim.api.nvim_set_keymap("", "<D-v>", "+p<CR>", { noremap = true, silent = true })
+vim.api.nvim_set_keymap("!", "<D-v>", "<C-R>+", { noremap = true, silent = true })
+vim.api.nvim_set_keymap("t", "<D-v>", "<C-R>+", { noremap = true, silent = true })
+vim.api.nvim_set_keymap("v", "<D-v>", "<C-R>+", { noremap = true, silent = true })
+
 -- Is there a way I can set these in neovide config?
 if vim.g.neovide then
+  -- Neovide copy & pasting
+  vim.keymap.set("n", "<D-s>", ":w<CR>") -- Save
+  vim.keymap.set("v", "<D-c>", '"+y') -- Copy
+  vim.keymap.set("n", "<D-v>", '"+P') -- Paste normal mode
+  vim.keymap.set("v", "<D-v>", '"+P') -- Paste visual mode
+  vim.keymap.set("c", "<D-v>", "<C-R>+") -- Paste command mode
+  vim.keymap.set("i", "<D-v>", '<ESC>l"+Pli') -- Paste insert mode
   -- Neovide Scaling support
   vim.g.neovide_scale_factor = 1.0
+  local set_scale_factor = function(value)
+    vim.g.nevoide_scale_factor = value
+  end
   local change_scale_factor = function(delta)
     vim.g.neovide_scale_factor = vim.g.neovide_scale_factor * delta
   end
@@ -14,10 +34,10 @@ if vim.g.neovide then
   vim.keymap.set("n", "<C-->", function()
     change_scale_factor(1 / 1.25)
   end)
-  -- Neovide
+  vim.keymap.set("n", "<C-0>", function()
+    set_scale_factor(1.0)
+  end)
+  -- General Neovide settings
   vim.g.neovide_detach_on_quit = "always_detach"
   vim.g.neovide_fullscreen = true
 end
-
--- Unfortunately, the file paths are too long and break things
-vim.loader.enable(false)

nvim/.config/nvim/lazyvim.json

@@ -2,7 +2,9 @@
   "extras": [
     "lazyvim.plugins.extras.lang.python",
     "lazyvim.plugins.extras.lang.rust",
-    "lazyvim.plugins.extras.lang.toml"
+    "lazyvim.plugins.extras.lang.tailwind",
+    "lazyvim.plugins.extras.lang.toml",
+    "lazyvim.plugins.extras.util.mini-hipatterns"
   ],
   "install_version": 8,
   "news": {

nvim/.config/nvim/lua/config/options.lua

@@ -1,3 +1,8 @@
 -- Options are automatically loaded before lazy.nvim startup
 -- Default options that are always set: https://github.com/LazyVim/LazyVim/blob/main/lua/lazyvim/config/options.lua
 -- Add any additional options here
+
+-- LSP Server to use for Python.
+vim.g.lazyvim_python_lsp = "basedpyright"
+-- Set to "ruff_lsp" to use the old LSP implementation version.
+vim.g.lazyvim_python_ruff = "ruff"

nvim/.config/nvim/lua/plugins/lsp.lua

@@ -0,0 +1,16 @@
+return {
+  "neovim/nvim-lspconfig",
+  opts = {
+    servers = {
+      basedpyright = {
+        settings = {
+          basedpyright = {
+            analysis = {
+              typeCheckingMode = "strict",
+            },
+          },
+        },
+      },
+    },
+  },
+}

nvim/.config/nvim/lua/plugins/obsidian.lua

@@ -0,0 +1,27 @@
+-- I don't know why I got rid of this lol, it's not like markdown-oxide was gonna replace it
+-- For configuration options: https://github.com/obsidian-nvim/obsidian.nvim/blob/main/lua/obsidian/config/default.lua
+return {
+  "obsidian-nvim/obsidian.nvim",
+  version = "*", -- recommended, use latest release instead of latest commit
+  ft = "markdown",
+  -- Replace the above line with this if you only want to load obsidian.nvim for markdown files in your vault:
+  -- event = {
+  --   -- If you want to use the home shortcut '~' here you need to call 'vim.fn.expand'.
+  --   -- E.g. "BufReadPre " .. vim.fn.expand "~" .. "/my-vault/*.md"
+  --   -- refer to `:h file-pattern` for more examples
+  --   "BufReadPre path/to/my-vault/*.md",
+  --   "BufNewFile path/to/my-vault/*.md",
+  -- },
+  ---@module 'obsidian'
+  ---@type obsidian.config
+  opts = {
+    workspaces = {
+      {
+        name = "Vault",
+        path = "~/Obsidian/Vault/",
+      },
+    },
+
+    -- see below for full list of options 👇
+  },
+}

nvim/.config/nvim/lua/plugins/presence.lua

@@ -0,0 +1,25 @@
+return {
+  "andweeb/presence.nvim",
+  opts = {
+    auto_update = true, -- Update activity based on autocmd events (if `false`, map or manually execute `:lua package.loaded.presence:update()`)
+    neovim_image_text = "certifiably NOT getting laid", -- Text displayed when hovered over the Neovim image
+    main_image = "neovim", -- Main image display (either "neovim" or "file")
+    client_id = "793271441293967371", -- Use your own Discord application client id (not recommended)
+    log_level = nil, -- Log messages at or above this level (one of the following: "debug", "info", "warn", "error")
+    debounce_timeout = 10, -- Number of seconds to debounce events (or calls to `:lua package.loaded.presence:update(<filename>, true)`)
+    enable_line_number = false, -- Displays the current line number instead of the current project
+    blacklist = {}, -- A list of strings or Lua patterns that disable Rich Presence if the current file name, path, or workspace matches
+    buttons = true, -- Configure Rich Presence button(s), either a boolean to enable/disable, a static table (`{{ label = "<label>", url = "<url>" }, ...}`, or a function(buffer: string, repo_url: string|nil): table)
+    file_assets = {}, -- Custom file asset definitions keyed by file names and extensions (see default config at `lua/presence/file_assets.lua` for reference)
+    show_time = true, -- Show the timer
+
+    -- Rich Presence text options
+    editing_text = "Editing %s", -- Format string rendered when an editable file is loaded in the buffer (either string or function(filename: string): string)
+    file_explorer_text = "Browsing %s", -- Format string rendered when browsing a file explorer (either string or function(file_explorer_name: string): string)
+    git_commit_text = "Committing changes", -- Format string rendered when committing changes in git (either string or function(filename: string): string)
+    plugin_manager_text = "Managing plugins", -- Format string rendered when managing plugins (either string or function(plugin_manager_name: string): string)
+    reading_text = "Reading %s", -- Format string rendered when a read-only or unmodifiable file is loaded in the buffer (either string or function(filename: string): string)
+    workspace_text = "Working on %s", -- Format string rendered when in a git repository (either string or function(project_name: string|nil, filename: string): string)
+    line_number_text = "Line %s out of %s", -- Format string rendered when `enable_line_number` is set to true (either string or function(line_number: number, line_count: number): string)
+  },
+}

tmux/.tmux.conf

@@ -11,6 +11,9 @@ set-option -g prefix C-a
 unbind C-b
 bind-key C-a send-prefix
 
+# Clipboard lol
+set -g allow-passthrough on
+
 # Start windows and panes at 1, not 0
 set -g base-index 1
 setw -g pane-base-index 1